evertz 7800 Manual page 86

Dual path hdtv down-converter
Hide thumbs Also See for 7800:
Table of Contents

Advertisement

7800 MultiFrame Manual
7812DCDA2Q-HD (-AA, –AES4) Dual Path HDTV Down-converter
G Gain
G Offset
B Gain
B Offset
Saturation Gain
Video Gain
Gamma Adjust
Gamma Level
Red Gamma Level
Green Gamma Level
Blue Gamma Level
H Filter Cutoff
V Filter Cutoff
Red Panel
Green Panel
Blue Panel
AFD Stamp
Aspect Ratio Conversion
Input H Start
Input H Stop
Input V Start
Input V Stop
CC Enable
Loss of CC Timeout
Recall Preset
Store User Preset
Auto Recall Preset
Ap Aspect Ratio Source
First Pixel Num In SD Prod Ap
Last Pixel Num In SD Prod Ap
Page 80
Adjusts the Gain value of the G component in the RGB Domain.
Sets the Offset in the RGB Domain.
Adjusts the Gain value of the B component in the RGB Domain.
Sets the Offset in the RGB Domain.
Sets the saturation gain level.
Sets the video gain level.
Enables gamma adjust. When enabled, the module will allow the
user to adjust the gamma level
Sets the gamma correction level.
Adjusts the Red Gamma levels.
Adjusts the Green Gamma levels.
Adjusts the Blue Gamma levels.
Sets the type of the horizontal filter in the scaler.
Sets the type of the vertical filter in the scaler.
Sets the value for the R component of the background side panels.
Sets the value for the G component of the background side panels.
Sets the value for the B component of the background side panels.
Selects the AFD signal that will be stamped on the output signal.
Selects the aspect ratio conversion that the module will perform.
Sets the left side crop position.
Sets the right side crop position.
Sets the top crop position.
Sets the bottom crop position.
Enables closed caption handling.
When video is lost, this control sets the amount of time (in seconds)
before the Closed Captioning timeouts.
Used to recall a current card configuration from one of the user
presets.
Used to store the current card configuration.
Enables automatic preset recall when input or output changes.
Selects whether the Production Aperture or the Clean Aperture is
used when converting input signals.
Defines the first active horizontal pixel for the SD Production
Aperture.
Defines the last active horizontal pixel for the SD Production
Aperture.
Revision 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

7812dcda2q-hd7812dcda2q-hd-aa7812dcda2q-hd-aes4

Table of Contents