Table of Contents
Advertisement
• PARAMETER information
Parameter Information Page1
Line Voltage Range: The acceptable line input voltage range.
Line FRE Range: The acceptable line input frequency range.
Bypass Voltage Range: The acceptable input voltage range for bypass mode.
Bypass FRE Range: The acceptable input frequency range for bypass mode.
ECO Voltage Range: The acceptable input voltage range for ECO mode.
ECO FRE Range: The acceptable input frequency range for ECO mode.
Parameter Information Page2
BATT Mode Work Time: The maximum discharge time in battery mode.
BATT Warning Voltage:
HIGH: High battery warning voltage.
LOW: Low battery warning voltage.
30
Shutdown Voltage: If battery voltage is lower this point, UPS will automatically
shut down.
Battery Age: It shows battery age.
Battery AH: It shows battery AH
Battery Number: It shows battery number.
Parameter Information Page3
Charger Number: The information of charger number.
Max Charge CURR: The setting value of the maximum charging current.
Float VOL: The setting value of the battery float voltage.
UPS Type: The information of UPS type.
Shutdown Delay: UPS will shut down in setting minutes. The countdown will
start after confirming the pop-up screen.
Restore Delay: UPS will automatically restart in setting minutes after the UPS
shuts down.
3.2.6. Data Log screen
Touch the icon
to enter data log page. Data log is used to record the
warning and fault information of the UPS. The record contains date & time,
code, type and description. Touch the icon
Touch the icon
to return to main screen. Touch the icon
previous menu.
Please refer to Section 3-6 and 3-7 for warning and fault code list.
or
to browse information.
to go back to
31
Advertisement
Table of Contents
