Related Manuals for Njoy Garun 15KL
Summary of Contents for Njoy Garun 15KL
- Page 1 Garun Series 80 pieces battery cabinet UPBPTA2422BX-AZ01B Installation and battery connection for 80 pieces EBM, sequence (20+20) x 2 150.1 Before using this product, carefully read all product documentation and retain it for future reference.
- Page 2 Thank you for purchasing our products! Please read this manual before using the product. Focusing on quality at competitive prices, nJoy designs consumer products for a better and enjoyable way into the digital world. The battery pack is a product that works only with an UPS.
- Page 3 Installation and battery connection in sequence (20+20)x2 Step 1 Turn the cabinet’s switch to OFF. Remove the top lid by sliding it Front Left upwards. of the side cabinet Left side view Step 2 Remove the left-side pieces that Front help keep the batteries in place.
- Page 4 Step 3 Find the first tray, second tray, third tray and fourth Fourth tray tray on which to place the batteries, as shown on the side picture. Place the batteries starting with the Front Third tray of the first tray and continue up on cabinet the respective trays in a total maximum of 80 pcs.
- Page 5 On the same tray, through the left side, place another set of 10 batteries, vertically, with the terminals facing outwards and down. Front of the cabinet Left side view Start placing the batteries on the second tray, through the right side, vertically, with the terminals facing outwards and up.
- Page 6 Step 5 Insert back the pieces that Front hold the batteries in place. of the cabinet Left side view Step 6 Find the connection cables. Each cable is numbered from 1 to 6, with the following quantities for each cable type: Cable numbering Cable Description...
- Page 7 Step 7 The following connections are made (according to the diagram on pages 8-9). Using the no.1 cables connect in series all the adjacent batteries, the (-, black) terminal of a battery connecting to the (+, red) terminal of the battery immediately adjacent.
- Page 8 Switch Front of the cabinet Red cables 3 and the second set of blue cables 5 connect on the other side Right side view Bottom...
- Page 9 Front of the cabinet Switch Black cables 2 and the second set of blue cables 5 connect on the other side Bottom Left side view...
- Page 10 Front of the cabinet Step 8 Make sure the cables are Left side view correctly connected on each side, then slide the top lid back on and secure it in place. Front of the cabinet Right side view...
- Page 11 Step 9 Switch the power to ON. The EBM is now active and functioning. Left side view Front of the cabinet Left side view...
- Page 12 NOTE! If fewer batteries are to be installed, start mounting them from the back of the cabinet and keep the numbers on each tray as equal as possible (+/- 1) and connect the batteries closest to the front side with the black cables provided. Example: For (17+17) x2 configuration: •...
- Page 13 Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
- Page 14 Memo...