Table of Contents
Advertisement
SC-P5300 Series
User's Guide
Menu List
Paper Setting
Use the Paper Setting menu to change the Paper Setting for the paper currently loaded in the printer. You can do
settings in the Paper Setting menu by pressing the paper setting information field or
* Default setting Setting values that are not marked vary according to the paper type.
Setting item
Set value
Roll Paper
Remove
Feed/Cut Paper
Print Adjustments
Paper Feed Adjust
Print Head Alignment
Advanced Paper Settings
Paper Thick-
0.01 to 1.50 mm
ness
0.4 to 59.1 mil
Platen Gap
Auto
mm, 2.1 mm, 2.6 mm
Top Margin
3 mm, 15 mm, 20 mm, 35
mm
Bottom Margin
3 mm, 15 mm
Paper Suction
-4 to 4 (0
Back Tension
Standard, High, Extra High
Menu List
Explanation
Roll paper is ejected.
Press How To... to view the procedure for removing roll paper after
it is ejected.
Press Backward/Forward to adjust the length of paper being fed.
Press Cut to cut the paper.
U
Select the following when banding (horizontal banding, tint
unevenness, or stripes) is detected in printing results.
U
This menu is used when graininess is detected in printing results.
U
This is displayed when Custom Paper is selected in Paper Type.
Thickness of roll paper that can be used on the printer is 0.08 to
0.50 mm (3.15 to 19.6 mil)
Can be adjusted in 0.01 mm (0.1 mil) increments.
*
Select a larger value (wider setting) if print results are scratched or
, 0.9 mm, 1.2 mm, 1.5
smudged.
If uneven color occurs at the top edge of the paper, print a larger
top margin.
*
Set to 15 mm if there are roller marks or smudges on the bottom
edge of the paper.
*
Thin or soft paper may not be fed correctly. If this occurs, reduce
)
the setting value.
Adjust this when paper gets wrinkled during printing.
"Types of Cuts" on page 50
"Paper Feed Adjust" on page 48
"Print Head Alignment" on page 49
102
in the home screen.
Advertisement
Table of Contents
