Table of Contents
Advertisement
SC-P5300 Series
User's Guide
The network connection status is indicated by an
icon as shown below.
Pressing the icon allows you to switch the network
connection status.
"Changing the Network Connection Methods"
U
on page 36
Not connected to a wired LAN or the
wired LAN or wireless LAN not set.
Connected to a wired LAN.
Wireless LAN (Wi-Fi) is disabled.
Searching for SSID, IP address not set,
or signal strength is 0 or poor.
Connected to a wireless LAN (Wi-Fi).
The number of lines indicates the
signal strength. The more lines there
are, the better the signal strength.
Wi-Fi Direct (simple AP) connection is
disabled.
Wi-Fi Direct (simple AP) connection is
enabled.
L
(Maintenance)
You can check and clean the print head nozzles,
replace consumables, and clean parts.
M
(Switch screens)
Each time you press it during printing switches the
screen between the following.
N
(Feed/Cut Paper)
When roll paper is loaded, you can feed the paper
to the cut position and cut it. You can also do cut
settings.
Introduction
Notes on Usage and
Storage
Installation Space
Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.
See the "Specifications Table" for the external
dimensions of the printer.
"Specifications Table" on page 161
U
* The following space is required at the rear of the
printer to print on poster board.
Paper Size
A2
Super A3
A3
A4
Notes When Using the Printer
Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
17
Rear Space
Approximately 370 mm
(approximately 14.56 in.)
Approximately 260 mm
(approximately 10.23 in.)
Approximately 200 mm
(approximately 7.87 in.)
Approximately 70 mm
(approximately 2.75 in.)
Advertisement
Table of Contents
