Removing Roll Paper; Ejecting Poster Board - Epson SC-P5300 Series User Manual

SC-P5300 Series User's Guide
D
Press Print Cutting Guideline.
The cutting guideline is printed and the paper
is automatically ejected to a position where it is
easy to with scissors.
E
Cut along the cutting guideline with your
scissors, and then press Done.
The paper rewinds and the leading edge of the
paper returns to the print standby position.

Removing Roll Paper

You can remove roll paper while viewing the
operation procedure on the control panel display as
shown below.
A
Confirm that Ready to print. appears on the
screen, and then press Eject Paper.
Roll paper is ejected.
Basic Operations
Note:
If printed paper is not cut and remains, a
confirmation screen appears.
Touch Cut to cut the paper at the default cut
position or touch Print Cutting Guideline to
print cut lines at the default position.
If you want to change the cut position or cut lines
print position to a desired position, touch Close to
cancel the message, and use
change it.
See the following for more information.
"Manual Cut Method" on page 50
U
B
Press How To... to view the procedure for
removing the roll paper.
Follow the on-screen instructions to continue.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.

Ejecting Poster Board

Poster board is held by the pressure roller after
printing.
52
on the screen to