Epson SC-P5300 Series User Manual page 11

SC-P5300 Series User's Guide
B
Paper cassette
Load cut sheets from 8 to 17 in. wide. Pull out the paper cassette as far as it goes when loading sheets on super
A3 or larger.
"Loading Paper Cassette/Cut Sheet/Poster Board" on page 41
U
C
Paper eject support
Supports smooth ejection of the paper by raising the paper eject support when printing on plain roll paper. U
"Loading Roll Paper" on page 40
D
Output tray
Ejected paper is collected here. Extend according to the size of the paper being ejected.
E
Spindle holder
Holds the spindle loaded with roll paper.
There is one on both the left and the right sides.
F
Paper cassette cover
Install to load super A3 or larger paper in the paper cassette. Be sure to install this to prevent dust from accu-
mulating inside the printer.
"Loading Paper Cassette/Cut Sheet/Poster Board" on page 41
U
G
Spacer for borderless printing
Install and use when you perform borderless printing on roll paper with a 2-inch core.
Paper widths that need the spacer installed for borderless printingU
Printing" on page 65
H
Media edge guide
Fixes the roll paper placed on the spindle.
I
Spindle
When you want to load roll paper into the printer, place the roll paper on the spindle.
J
Roll adapter
Install when placing roll paper with a 3-inch core on the spindle.
K
Roll paper cover
Open to replace the roll paper. To prevent the inside of the printer from getting dusty, always keep this closed
during use.
Introduction
"Supported Media Sizes for Borderless
11