Epson SC-P5300 Series User Manual page 142

SC-P5300 Series User's Guide
c
Important:
❏ Never touch any parts or circuit boards other
than those that need to be cleaned. Doing so
may cause the printer to malfunction or print
quality to decline.
❏ Always use new cleaning sticks. Re-using a
stick that has already been used may actually
apply dirt to the printer.
❏ Do not touch the tips of the cleaning sticks.
Sebum may stick to it reducing the cleaning
effect.
❏ Touch a metallic object before starting work to
discharge any static electricity.
❏ Do not wipe the caps with an organic solvent
such as alcohol. Doing so may damage the
print head.
❏ Do not move the print head by hand. Failure
to observe this precaution could damage the
printer.
❏ If paper is loaded in the printer, we
recommend removing it before starting work.
A
Touch to select Capping Station/Wiper
Cleaning on the screen.
B
Press Start-How To... to view the procedure.
Follow the on-screen instructions to continue.
You can watch a video of the cleaning procedure on
YouTube.
Epson Video Manuals
U
Problem Solver
If the subtitles are not displayed when you play the
video, click the subtitles icon shown in the image
below.
The paper is wrinkled.
Are you using the printer at normal room
o
temperature?
Epson special media should be used at normal room
temperature (temperature: 15 to 25 °C, humidity: 40
to 60 %). For information about paper such as thin
paper from other manufacturers that requires
special handling, see the documentation supplied
with the paper.
When using non-Epson special media, have
o
you made the paper configuration?
When using non-Epson special media, configure the
paper characteristics (custom paper) before
printing.
"When the Paper Type is not Displayed on the
U
Control Panel or in the Printer Driver" on page 44
142