Epson SC-P5300 Series User Manual page 162

SC-P5300 Series User's Guide
Interface Specifications
Standards IEEE802.11b/g/n/a/ac
Frequency Range IEEE802.11b/g: 2.4 GHz
IEEE802.11n: 2.4 GHz (HT20 only)
IEEE 802.11a/n/ac: 5 GHz
Coordination Infrastructure
Modes Wi-Fi Direct (Simple AP) (Not
supported for IEEE 802.11b)
Wireless Securities WEP (64bit/128bit)
WPA-PSK (TKIP)
WPA2-PSK (AES)
WPA3-SAE
WPA2-Enterprise (AES) (EAP-TLS/
PEAPTLS/PEAPMSCHAPv2/
EAP-TTLS)
WPA3-Enterprise
Network Printing EpsonNet Print (Windows)
Protocols/Func- Standard TCP/IP (Windows)
*4 WSD Printing (Windows)
tions
Bonjour (Mac)
IPP Printing (Windows)
IPP Printing (Mac)
Security Standards/ SSL/TLS (HTTPS Server/Client,
Protocols IPPS)
IEEE802.1X
IPsec/IP Filtering
SNMPv3
*1 Compatible with the USB 3.0 Specification.
*2 Use a category 5e or higher STP (shielded twisted pair)
cable.
*3 Complies with WPA2 standards with support for WPA/
WPA2 Personal.
*4 EpsonNet Print supports IPv4 only. The others support
both IPv4 and IPv6.
Warning:
❏ To prevent radio interference to the licensed
service, this device is intended to be operated
indoors and away from windows to provide
maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is
subject to licensing
❏ This is a class A product. In a domestic
enviroment this product may cause radio
interference in which casethe user may be
required to take adequate measures.
Appendix
Ink Specifications
Type
Ink type
Use by date
Print quality guar-
antee expiry
Storage temperature
*3
Cartridge capacity
c
❏ The ink freezes if left at below -10 °C (-14 °F)
❏ Do not refill the ink cartridges.
For users in Zambia
See the following website to check the information for
ZICTA Type Approval.
https://support.epson.net/zicta/
For users in Malaysia
Frequency Band: 2400-2483.5 MHz
162
Dedicated ink cartridges
Water-based pigment ink
See the expiration date printed on
the ink cartridge package or on
the cartridge (store at normal
temperature)
6 months (after installed to the
printer)
Packed -20 to 40 °C (-4 to 104 °F) (within 4
days at -20 °C (-4 °F), within a
month at 40 °C (104 °F))
Installed -20 to 40 °C (-4 to 104 °F) (within 4
days at -20 °C (-4 °F), within a
month at 40 °C (104 °F))
Packed and -20 to 60 °C (-4 to 140 °F) (within 4
Transported days at -20 °C (-4 °F), within a
month at 40 °C (104 °F) within 3
days at 60 °C (140 °F))
200 ml
80 ml (for initial charging)
Important:
for a long time. If it does freeze, leave it at
room temperature (25 °C (77 °F)) for at least
3 hours.