Table of Contents
Advertisement
SC-P5300 Series
User's Guide
F
Press Cancel on the screen. If you want to stop
a job as is, press the P button on the printer to
turn off the power. If you want to continue, see
the following, according to the job to be done.
"Loading Roll Paper" on page 40
U
"Loading Paper Cassette/Cut Sheet/Poster
U
Board" on page 41
Note:
If the cleaning sheet gets fed, press the
then remove the cleaning sheet.
You cannot reuse a cleaning sheet that has been used
once.
Cleaning the platen
A
Make sure the printer is turned off and the
screen has turned off, and then unplug the
power cable from the outlet.
B
Leave the printer for a minute.
Maintenance
C
Open the printer cover and use a soft, clean
cloth to carefully wipe away any dust or dirt
inside the printer.
Thoroughly wipe the blue part shown in the
following illustration. To avoid spreading the
dirt, wipe from the inside to the outside. If
there is a serious dirt problem, clean it using a
soft, clean cloth dampened with a mild
detergent. Then, wipe the inside of the printer
with a dry, soft cloth.
and
c
Important:
❏ When cleaning, do not touch the roller
and the ink absorption parts (gray parts)
in the illustration above; otherwise,
prints may be soiled.
❏ Be careful not to touch the ink tubes
inside the printer, otherwise, the printer
may be damaged.
130
Advertisement
Table of Contents
