Table of Contents
Advertisement
SC-P5300 Series
User's Guide
Moving or Transporting
the Printer
This section describes how to move or transport the
printer.
As shown below, always lift the printer by placing your
hands in the indentations on the left and right sides.
c
Important:
❏ Only hold the required area; otherwise, the
printer may be damaged.
❏ Move and transport the printer with ink
cartridges installed. Do not remove the ink
cartridges; otherwise, the nozzles may be
clogged and make it impossible to print, or ink
may leak.
Before Moving or Transporting
Make the following preparations in advance before
moving or transporting the printer.
A
Remove all paper from the printer.
Appendix
B
Turn off the printer, and disconnect all cables
such as the power cable and LAN cable from
the printer.
C
Close all of the printer's covers.
Notes for Transporting the
Printer
To protect the printer from vibration and shocks, use
protective materials and packaging materials to
package the printer in the same was as when it was
purchased.
Be sure to attach the protective material shown below
to secure the print head when packaging the printer.
For how to attach it, see the printer's Setup Guide
(booklet), and attach it to its original position in the
reverse procedure of removing it.
Caution:
When transporting the printer, do not tilt it, stand
it on end, or turn it upside down.
The ink could leak.
Procedure for Moving or
Transporting the Printer
This section explains how to prepare the printer for
use after moving.
Note the following points when connecting the power
cable.
157
Advertisement
Table of Contents
