Selecting A Font And Menu - Epson LQ-690II User Manual

Example of label attachment position:

Selecting a Font and Menu

You can select one of the printer's fonts and Menu (default settings) by using the buttons on the
printer's control panel, as described below.
Note:
❏ You can select other fonts than the seven fonts on the control panel by selecting Others. Other fonts
can be set in the Default Setting mode. See "Changing default settings" on page 26. This function
is disabled when using the Windows driver. Driver control is enabled.
❏ Settings you make in application programs usually override settings you make from the printer's
control panel. For best results, use your application to select a font and make other settings.
❏ Bar code fonts cannot be selected via the control panel.
1. Make sure that the printer is not printing. If it is, hold down the
2. Press the o button until the three Font lights indicate the desired font as shown below.
HSD
Draft
LQ-690II/LQ-690IIN User's Guide
button for three seconds.
Courier
Prestige
Printer Basics 20