Table of Contents
Advertisement
Disconnect this product from its power source before servicing.
Do use the original packaging if the device is to be transported.
Avoid direct eye exposure to the light source while the product is on.
Do not operate this product if you see damage on the housing, shields, or cables.
Have the damaged parts replaced by an authorized technician at once.
Installation:
The fixture should be fixed on the clamp. Always ensure that the unit is firmly fixed to
avoid vibration and slipping off during operation. Ensure that the trussing or area of
installation must be able to hold 10 times the weight without any deformation. Always
install a safety cable that can hold at least 12 times the weight of the fixture when
installing.
Do install and operate by qualified operator. It must be installed in a place where there
is out of the reach of people.
-4-
Advertisement
Table of Contents
