Light Sky LUNAR BSW User Manual page 12

3.As shown in [B], gently lift the gobo driven wheel from the edge upwards from the back
of the gobo wheel and pull it out slowly to take out a single gobo.
B
4.Use tweezers or other small objects to take out the snap ring at [C] (if the pattern piece
is coated with glass glue for fixing, please use a professional Use the cleaning agent to
remove the glass glue and then take out the circlip, so as not to damage the pattern piece).
C
5. When assembling the gobo, avoid touching the gobo directly with your hands, and
as shown in [D], the coated surface of the gobo should face the light source.
D
-11-