Table of Contents
Advertisement
5.How To Set The Unit
5.1.Main Function
The lamp is powered on. When the system initialization and lamp reset are completed, and the
standby interface is displayed on the display screen, press OK to enter the preset menu interface.
Use the up/down/left/right keys to select ① level menu: DMX address, basic information,
personality settings, manual control, service options, bulbs, language, screen rotation.
The main functions are as follows:
Main menu
I menu
DMX Address
→ Address:001-512
Lamp hours
Light source time
Temperature
communication status
Information
→
Motor information
fault status record
Device channel
Version
light bulb switch
Mode selection
Scene mode
Channel control
Manual control →
Reset
Channel selection
Master-slave mode (effective when
not in DMX mode, select the data
output mode, the lamp automatically
detects the DMX state and
automatically switches the output to
prevent data conflict)
X axis reversal
Personal
Y
axis reversal
Optocoupler Correction
X axis offset
Y axis offset
Light-on mode (sets the way the
bulb is turned on for the first
time after it is powered on)
Factory settings
language
screen protector
screen rotation
display
→
setting
pilot lamp
screen backlight
On the main interface, press and hold the exit button (the button on the left
Parameter
side of the upright display) for 3 seconds, and a password box will pop up.
calibration
Enter the password 2222 to enter the parameter calibration interface.
II menu
1-512
Clear device time
Clear Light Time
light source/display panel/sensor 1/sensor 2 temperature
Display the communication status between the board and the motor board
Motor information in the device
Record the fault name and fault time
The current communication data of the device
Manufacturer/device name/model/display board version and
date/motherboard version and date
ON /OFF
DMX/self-propelled/voice control/scene
automatic /1~10
scene selection(1~10)
scene time
（0s-25.5s）
→
Channel parameter setting（0~255）
X axis Yaxis
colour
pattern
Strobe
Focusing and Prisms
whole
Select according to the number of existing channels in the program
automatic
Slave
main engine
ON /OFF
ON /OFF
ON /OFF
4~150
4~48
Power-on
manual
after reset
Restore to factory default parameter settings
Chinese / English
closure
model
1
model
2
3
model
positive/reverse
→
model
1
model
2
model
3
1~10
-16-
III menu
ESC is -1, ENTER is +1
UP is + current channel number,
DOWN is - current channel number
A confirmation dialog box will pop up, press
the confirm key to confirm the current operation,
and ESC/ENTER to exit. Turn on or off the light
bulb, the switch time interval is limited to 30S
OK key to switch
OK key to switch
OK key to switch
Press OK to enter the parameter modification interface
Press OK to enter the parameter modification interface
Reset XY axis
reset color wheel
Reset the gobo
reset strobe
Reset focus and prism
reset all
The light fixture operates as built-in, if there is no
DMX signal, it will output data (synchronization),
otherwise it will not output data
The lamps operate as built-in and do not output
data (do not synchronize with other lamps)
If there is no DMX signal, the luminaire operates as built-in,
otherwise, the luminaire operates as the DMX signal
Turn on the bulb first when power on, reset the lamp after 30S
After the reset is completed, manually turn on the bulb
through the menu or console
Reset the lamp after 3 seconds of power-on, and turn on
the bulb after the reset is complete
The screen is always on
Screen off after 20S
The channel information is displayed after 20S,
and the screen backlight turns off after 30S
The manufacturer's LOGO is displayed after 20S, and
the screen backlight turns off after 30S
→
On when there is a signal, off when there is no signal
Off when there is a signal, on when there is no signal
Flashes when there is a signal, off when there is no signal
After a period of inactivity, it will return to the
set brightness, and if it is operated, it will
return to full brightness
Advertisement
Table of Contents
