Light Sky LUNAR BSW User Manual page 21

Table of Contents

② Reset

Select the Reset function, press the OK key to enter the lower menu, and use the up/down keys to

select: system reset (i.e. machine reset), horizontal and vertical reset, head motor reset, and exit.

Press the OK key to conﬁrm and execute the selected reset command, and return to the upper menu.

② Test Lamp

Select the Test Lamp function, press the OK key to enter the lower menu, and you can use the

up/down key to select: test horizontal and vertical, test head effect, overall test, exit, then press the

OK key to conﬁrm the selection, and execute the selected test command, and press the OK key or

the left/right key to return to the upper menu.

①

Service

Enter the preset menu interface，select

you can use the up/down keys to select: historical fault information, clear fault information, calibration,

factory setting, exit, press the OK key to enter the lower menu, or press the left/right key to return to

the upper menu.

② Error list

Select the Error list function, press OK to enter the lower menu, you can view the fault record of the

whole machine, press OK or left/right to return to the upper menu.

② Clean Error

Select the Clean Error function, press OK to enter the lower menu, use up/down keys to select:

Clear, Keep, you can clear or retain the fault records of lamps, press OK to conﬁrm and return to

the upper menu.

② Calibration

Select the Calibration function, press the OK key to enter the lower menu, press the Up/Down key

to select each channel of the current channel mode, press the Left/Right key to manually ﬁne tune

the DMX value of each channel from 0 to 255 (default 128), and press the OK key to return to the

upper menu.

function，press the OK key to enter the lower menu,

-20-

Table of Contents