Table of Contents
Advertisement
2
Magstim 200
SECTION 11: EMC EMISSIONS AND IMMUNITY
Guidance and Manufacturer's Declaration – Electromagnetic Emissions
2
The Magstim 200
is intended for use in the electromagnetic environment specified below. The customer or the
user of the equipment should assure that it is used in such an environment.
Emissions Test
Compliance
RF emissions
Group 1
EN55011
RF emissions
Class B
EN55011
Harmonic
Class B
Emissions
(by equipment
IEC 61000-3-2
type)
Voltage
fluctuations/ flicker
Complies
emissions
IEC 61000-3-3
Guidance and Manufacturer's Declaration – Electromagnetic Immunity
2
The Magstim 200
is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the Magstim 200
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
2
Magstim 200
as recommended below, according to the maximum output power of the communications.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
The Magstim Company Limited 3001-23-04
Electromagnetic environment - guidance
The Magstim 200
perform its intended function. Nearby electronic equipment may be
affected.
The Magstim 200
domestic and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic
purposes.
2
can help prevent electromagnetic interference by
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
80 MHz to 800 MHz
3,5
] √ P
d = [
d = [
V
1
Where V
= 3
Where E
1
0,117
0,369
1,167
3,689
11,667
2
must emit electromagnetic energy in order to
2
is suitable for use in all establishments other than
m
800 MHz to 2,5 GHz
3,5
] √ P
d = [
E
1
= 3
Where E
1
0,117
0,369
1,167
3,689
11,667
30
7
] √ P
E
1
= 3
1
0,233
0,738
2,333
7,379
23.333
LUMENIS EX1091
Page 32
th
18
March 2005
Advertisement
Table of Contents
