The Setup Menu; General Remarks; Opening A Setup Menu; Selecting And Setting Parameters - Fronius TransPocket 2500 Comfort Operating Instructions Manual

The Setup menu

General remarks

On the TP 2500 Comfort and TP 3500 Comfort power sources, there is a separate Setup
menu for each welding process.
Opening a Setup
menu
Selecting and set-
ting parameters
46
Press the Process button to select the process
1
- For the MMA welding, MMS welding with CEL electrode and TIG weld-
ing processes, the graphic is displayed with the welding parameters.
For the Job welding process, the last selected job is displayed.
-
Press the Setup button
2
The Setup menu is displayed, e.g.:
Turn the dial to set a parameter:
1
Press the dial to set the parameter
2
You can now change the parameter value: