EXFO USER GUIDE User Manual page 226

SCPI Command Reference
Product-Specific Commands—Description
Description
Syntax
Parameter(s)
Response Syntax
Response(s)
Example(s)
See Also
218
:TRIGger[1..n][:SEQuence]:SLOPe?
This query returns the rising or falling edge status
of the trigger condition. It defines whether
positive or negative transitions will trigger the
acquisition.
:TRIGger[1..n][:SEQuence]:SLOPe?
None
<Slope>
Slope:
The response data syntax for <Slope> is defined
as a <CHARACTER RESPONSE DATA> element.
The edge used for trigger acquisition, where:
0 or NEGative -Falling edge trigger.
1 or POSitive -Rising edge trigger.
TRIG:SEQ:SLOP?
TRIGger{:SEQuence]:SLOPe
TRIGger[:SEQuence]:LEVel
TRIGger:POSition
TRIGger:POSition:CATalog?
TRIGger[:SEQuence]:STATe
TRIGger[:SEQuence]:SOURce
IQS-1600