EXFO USER GUIDE User Manual page 140

SCPI Command Reference
Product-Specific Commands—Description
Example(s)
See Also
132
:INITiate[1..n]:AUTO
This parameter allows to set the acquisition
mode:
CONT set Continuous acquisition.
NCON set Single acquisition.
TRAC:POIN TRC1, 5
INIT:AUTO 1, CONT
INIT:AUTO 0, CONT
or
SENS:POW:RANG:HIGH 1
SENS2:POW:RANG:HIGH 1
SENS3:POW:RANG:HIGH 1
SENS4:POW:RANG:HIGH 1
INIT:AUTO 1, NCON
ABORt
INITiate:AUTO?
INITiate:CONTinuous
INITiate:EXTRema
INITiate:IMMediate
MMEMory:ACQuisition
TRACe:POINt
SENSe:POWer:DC:RANGe:HIGH
IQS-1600