EXFO USER GUIDE User Manual page 147

Description
Syntax
Parameter(s)
Response Syntax
Response(s)
Example(s)
See Also
High Speed Power Meter
Product-Specific Commands—Description
:MEASure[1..n][:SCALar]:POWer:
This query returns the minimum power
measurement value recorded for a channel in
Continuous acquisition mode.
:MEASure[1..n][:SCALar]:POWer:MINimum?
None
<MinPower>
MinPower:
The response data syntax for <MinPower> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
This query returns the power measurement
minimum in the currently selected unit.
The number of digits after the decimal depends
on the selected resolution. To change the
resolution of the displayed power value in dB or
dBm, use the FORM[:DATA] command. To know
the current measurement unit, use the
SENS:POW[:DC]:UNIT? query.
INIT:EXTR ON
MEAS:POW:MIN?
INITiate:EXTRema
MEASure:SCALare:POWer:MAX?
SCPI Command Reference
MINimum?
139