EXFO USER GUIDE User Manual page 179

Description
Syntax
Parameter(s)
Example(s)
Notes
See Also
High Speed Power Meter
:SENSe[1..n]:FREQuency:CONTinuous
This command sets the continuous acquisition
rate in Hz.
:SENSe[1..n]:FREQuency:CONTinuous<wsp><
ContinuousRate[<wsp>HZ]>
ContinuousRate:
The program data syntax for <ContinuousRate>
is defined as a <DECIMAL NUMERIC PROGRAM
DATA> element followed by an optional
<SUFFIX PROGRAM DATA> element. The
allowed <SUFFIX PROGRAM DATA> element is
HZ.
The <numeric_value> parameter is the
Continuous acquisition rate.
SENS:FREQ:CONT 256
This command is not executed if a data
acquisition is in progress. In that case, the
"acquisition in progress" message will be
returned.
SENSe:FREQuency:CONTinuous?
SENSe:FREQuency:CONTinuous:CATalog?
SENSe:FREQuency:NCONtinuous
SENSe:FREQuency:NCONtinuous?
SENSe:FREQuency:NCONtinuous:CATalog?
SCPI Command Reference
Product-Specific Commands—Description
171