EXFO USER GUIDE User Manual page 196

SCPI Command Reference
Product-Specific Commands—Description
Description
Syntax
Parameter(s)
Example(s)
Notes
See Also
188
:SENSe[1..n]:POWer[:DC]:REFerence:
This command performs a new reference
measurement and changes the display to show
relative power (dB or W/W) for all channels.
:SENSe[1..n]:POWer[:DC]:REFerence:ALL
None
SENS:POW:REF:ALL
SENS:POW:REF?
SENS2:POW:REF?
This command is not executed if a data
acquisition is in progress. In that case, the
"Acquisition in progress" message will be
returned.
SENSe:POWer:[DC]:REFerence
SENSe:POWer:[DC]:REFerence?
SENSe:POWer:[DC]:REFerence:DISPlay
SENSe:POWer:[DC]:REFerence:STATe
SENSe:POWer:[DC]:REFerence:STATe?
ALL
IQS-1600