Validation And Liability; Limitations On Liability; General Safety Warning - Omron Regular Payload Series Hardware Installation Manual

all local and national safety regulations for the location in which the robot is installed.
The TM Robot shall be used according to its intended use.

Results of the risk assessment may require the use of additional risk reduction measures.

Power to the robot and its power supply must be locked out and tagged out or have means to control

hazardous energy or implement energy isolation before any maintenance is performed.
Dispose of the product in accordance with the relevant rules and regulations of the country or area

where the product is used.

2.4 Validation and Liability

The information contained herein neither includes how to design, install, and operate a complete robotic arm
system, nor involves the peripherals which may affect the safety of the complete system. The integrators of the
robot should understand the safety laws and regulations in their countries and prevent major hazards from
occurring in the complete system.
This includes but is not limited to:
Risk assessment of the whole system

Adding other machines and additional safety mechanisms based on the results of the risk assessment

Building appropriate safety mechanisms in the software

Ensuring the user will not modify any safety-related measures

Ensuring all systems are correctly designed and installed

Clearly labeling user instructions

Clearly marked symbols for installation of the robot arm and the integrator contact details

Collecting all documents into the technology folder, including the risk assessment, and this manual

CAUTION:
This product is a partly complete machine. The design and installation of the complete system
must comply with the safety standards and regulations in the country of use. The user and
integrators of the robot should understand the safety laws and regulations in their countries
and prevent major hazards from occurring in the complete system.

2.5 Limitations on Liability

Even if the safety instructions are followed, any safety-related information in the Manual shall not be considered
as a guarantee that the product will not cause any personal injury or damage.

2.6 General Safety Warning

1.
The actual noise measured in a factory setting is about 49.3 dB under without production. (Condition: leave
machine body 1m distance and at 1.6m height from the floor and 80% of maximum speed). If the sound
Regular Payload Series-Hardware Installation Manual TM5 Series
11