Table of Contents
Advertisement
Operation
Error message
5.4.2
Display Menu
D000030110 d – E650 Series 3 (ZMD400AT/CT, ZFD400AT/CT) – User Manual
The meter can generate an error message on the basis of self-tests.
According to parameterisation, this can be permanently included in the
operating display. In the event of a serious error (fatal or critical error), it
replaces the normal operating display. After a fatal error, the meter no
longer operates and must be replaced. In case of a critical error, the error
message can be acknowledged with the display key.
Fig. 5.6
Example of an error message (insufficient battery voltage)
In case of an error message the procedure described in section 6.2 "Data
Readout" should be followed.
Fig. 5.7
Display menu overview
63/93
© Landis+Gyr AG
Advertisement
Table of Contents
