Map Software Tools - Landis+Gyr E650 Series User Manual

Description of Unit
1.8

MAP Software Tools

Areas of application
MAP110
MAP120
D000030110 d – E650 Series 3 (ZMD400AT/CT, ZFD400AT/CT) – User Manual
There are two software tools available for parameterisation of the E650
meter and for communication with the meter: MAP110 and MAP120
Fig. 1.21 Application of MAP software tools
The MAP110 Service Tool covers all the following applications normally re-
quired for meter installation and in the service sector:

Billing data readout

Readout and export of profiles (load profile(s), stored values and event
log, dedicated event logs)

TOU (Time of Use) readout and modification

Billing period reset

Register and profile resets

Setting of certain parameter ranges such as primary data, time switch etc.

Communication input settings

Communication settings for Landis+Gyr communication units readout
and modification

GSM installation aid for Landis+Gyr communication units (field
strength indicators, telephone number information, PIN-code handling)

Test SMS message transmission

Analysis and diagnostic functions
The Landis+Gyr MAP120 software is used to reparameterise the meter and
the communication unit, i.e. it is possible to read out and modify all device
parameters.
In contrast to communication devices from other manufacturers, no addi-
tional software and training costs are incurred by the use of Landis+Gyr
CUs, since the MAP software tools support both meters and communica-
tion units.
29/93
© Landis+Gyr AG