Connections - Landis+Gyr E650 Series User Manual

Mechanical Construction
Tariff face plate
3.3

Connections

D000030110 d – E650 Series 3 (ZMD400AT/CT, ZFD400AT/CT) – User Manual
The tariff face plate is placed in the front door, which can be swung out
sideways to the left and is secured by a utility seal. The connection diagram
of the meter is shown on the back of the face plate and is therefore visible
with the front door open.
Fig. 3.8 Tariff face plate (example ZxD400CT)
1 General data appearing in the display
2 Measured quantities
3 Pulse input data
4 Output contact data
5 Ownership designation
6 Transformer data and readout factor
7 Communication unit data (if present)
Fig. 3.9 Meter with terminal cover removed
The terminal block with all meter connections is situated behind the termi-
nal cover. Two utility seals in the fixing screws of the terminal cover prevent
unauthorised access to the phase connections and therefore also prevent
unrecorded energy consumption.
37/93
© Landis+Gyr AG