Landis+Gyr E650 Series User Manual page 35

Mechanical Construction
Seal component
D000030110 d – E650 Series 3 (ZMD400AT/CT, ZFD400AT/CT) – User Manual
An additional component, which is easy to install, allows the use of a stan-
dard padlock instead of a utility seal.
Fig. 3.4 Front door sealing using a padlock
The seal component is stowed away in a holder under the front door when
not in use.
Fig. 3.5 Stowage of seal component when not in use
The seal component is installed as follows:

Slide the seal component into the vertical slot at an angle, as shown,
(position 1) until it contacts the rear wall.

Now turn the seal component until it is horizontal and slide it down into
position 2 as illustrated. The two bulges firmly fix the seal component
into the lateral grooves.
35/93
© Landis+Gyr AG