Landis+Gyr E650 Series User Manual page 64

64/93
Display check
Display menu
Value display
© Landis+Gyr AG
Brief operation (< 2s) of the display key "down" or "up" causes a change of
the operating display, e.g.:
to the display check:
All segments of the display are active here. The index and value fields
should be checked each time for missing segments. This can prevent
incorrect readings.
Pressing the display key "down" or "up" again briefly, changes to the dis-
play menu or directly to the display list. The first menu item appears, e.g.
"Display list" (standard data):
The menu item only appears when several menu items exist. Otherwise
direct entry is made to the display list.
The next menu item appears for every further brief operation of the "down"
display key, e.g. "Data profile", "Event log" etc. The first menu item appears
again after the last item.
The preceding menu item is displayed again by briefly pressing the "up"
display key.
Both display keys ("down" and "up") must be pressed simultaneously to
return to the operating display from the display menu.
The first value of the list associated with the present menu is displayed by
pressing the display key "down" or "up" for longer (at least 2 seconds), and
is normally the error message:
The next list value appears for every further brief operation of the "down"
display key. Brief operation of the "up" key again displays the preceding
value. The sequence of values in the list is determined by the parameter-
isation.
A rapid run is started by holding down the display key "down" or "up" (at
least 2 seconds). The main values of the list are then displayed while the
key remains pressed, but no stored values.
Examples of values in a display list:
D000030110 d – E650 Series 3 (ZMD400AT/CT, ZFD400AT/CT) – User Manual
Operation