Software Version Number (Register 048); Power-Fail Counter (Register 050); Tn And Id Number Of Last Ctn Entered (Register 054); Id Number Of Last Ctn Entered (Register 055) - Landis+Gyr Cashpower Gem Lite User Manual

26/27

5.1.18 Software Version Number (Register 048)

The meter displays the software version number masked into the microprocessor.

5.1.19 Power-Fail Counter (Register 050)

The meter displays the number of power failures that have occurred since installation.


5.1.20 TN and ID Number of Last CTN Entered (Register 054)

The meter displays scrolls the last 20 digit Credit Transfer Number (CTN) and the Token Identifier on the LCD in
the date and time format.

5.1.21 ID Number of Last CTN Entered (Register 055)

The token identifier is displayed (0 – 16777215) i.e. number of minutes elapsed since 01:01:1993.


5.1.22 Value of Last CTN Entered (Register 056)

The meter displays the value (I n kWh) of the last Credit Transfer Number entered.

5.1.23 Key Revision and Key Type (Register 057)

Displays the Key Revision Number (KRN) and key type, for more details, refer to the STS specification

5.1.24 Tariff Index (Register 058)

Displays the Tariff Index (TI) of the meter.


5.1.25 Current Credit Register - 10Wh Resolution (Register 059)

The meter displays the value of the credit register with a resolution of 0.01kWh. The most significant digit of the
display (if in use) will be "pushed" off the display in this mode.

5.1.26 SGC Register (Register 060)

This register will contain the initial SGC value, personalised at the time of manufacture. Once a successful STS
meter key-change has been performed, the information is no longer valid and is, therefore, cleared.

© Landis+Gyr (Pty) Ltd
Review
This register is cleared with the entry of a tamper reset token.
This value is not of use, unless the prepayment vending system prints this
same token identifier on the receipt, in which case you can compare the
token identifier on the receipt, with the token identifier in the meter to
confirm that the token has been entered.
This is a very important register. If the TI of the meter does not match with
the TI that is linked to the meter in the Prepayment Vending system, the
meter will not accept the 20 digit token. In the case where a meter will not
accept a token, compare the TI printed on the receipt against the TI in the
meter.
This option gives a quick indication of whether a key-change has been
performed on the meter.
Information Functions
Cashpower Gem Lite – User Guide