Advertisement
A.9 - Adjusting the awning's cruise speed
A
NOTES AND WARNINGS
• For the values of the five options (V1=minimum, V2, V3=nominal, V4, V5=maximum speed), see "Technical characteristics".
• To determine whether the option chosen for the cruise speed of the awning is compatible with the characteristics of the your awning (weight, roller dimensions, torque),
refer to "Technical characteristics".
• The "V3=nominal speed" setting is the factory setting.
1
(x 1)
2
PRG
Press and release
count 2 movements.
the button (1 time);
4
Select the desired op-
tion and program it as
follows
Press and release the button the number of times indicated in the option you have chosen;
4
1 /
2 /
3 /
7
4 /
sec.
5 /
After about 7 seconds, the motor performs a num-
ber of movements equal to the number of pulses
entered.
A.10 - Adjusting the acceleration (at the start of the awning movement) and deceleration
A
(towards the end of the movement)
NOTES AND WARNINGS
• "Acceleration/deceleration" is expressed in roller rotations. This is the number of rotations of the roller the system requires to accelerate from the start of the move-
ment to the cruise speed. It also represents the number of rotations of the roller the system requires to decelerate from cruise speed to stopping at the limit switch.
• The "brief acceleration/deceleration" setting is the factory setting.
1
(x 1)
2
PRG
Press and release
count 2 movements.
the button (1 time);
4
= 5 sec
release it after 5
Hold down the
button;
seconds;
2
(x 1)
PRG
Press and release
count 2 movements.
the button (1 time);
5 OPTIONS:
(x ...)
1 press = sets V1 MINIMUM speed
2 presses = sets V2
3 presses = sets V3 NOMINAL speed
4 presses = sets V4
5 presses = sets V5 MAXIMUM speed.
5
= 5 sec
?
Hold down the button;
2
(x 1)
PRG
Press and release
count 2 movements.
the button (1 time);
5
Select the
desired
option and
3
program it
as follows
count 3 movements.
3
= 5 sec
2
Hold down the but-
ton;
release it after 5 seconds;
3
= 5 sec
2
Hold down the button;
5 OPTIONS:
(x ...)
1 press = sets no acceleration/deceleration = 0 rotations
2 presses = sets brief acceleration/deceleration = 0.7 rotations
3 presses = sets nominal acceleration/deceleration = 1.5 rota-
tions
4 presses = sets long acceleration/deceleration = 2 rotations
5 presses = sets maximum acceleration/deceleration = 3 rota-
tions
Press and release the button the number of times indicated in the option you have
chosen;
3
release it after 5
count 3 movements.
seconds;
continues
end
3
count 3 movements.
release it after 5
count 3 movements.
seconds;
4
4
3
continues
English – 14
Advertisement
