A.3.2 - To program the DOWN limit switch ("1")
1
(x 1)
2
PRG
Press and release
count 2 movements.
the button (1 time);
3
" 1 "
... release the button as soon as the awning
reaches position "1" ( DOWN limit switch).
A.4 - Programming an INTERMEDIATE POSITION (position "H")
A
NOTES AND WARNINGS
• This procedure memorises an intermediate position (position "H") between the Up ("0") and Down ("1") limit switch positions. When the automation is being used,
after giving the intermediate position command, the system will automatically stop the awning at the programmed "H" position.
• You can memorise up to 30 "H" positions wherever you wish, provided that these are between the two limit switch positions. These positions can only be pro-
grammed after the limit switch positions. Repeat this procedure for each position you wish to memorise.
• The first "H" position must be programmed using the buttons s+t, on the transmitter used to run the procedure itself. However, each subsequent position
"H" must be programmed using a button on another non-memorised transmitter.
• To change an existing "H" position, move the awning to the desired height and run this procedure; in step 06, however, press the button associated with the exist-
ing "H" position you are changing.
1
2
(x 1)
" H "
Move the awning to the
Press and release
desired "H" position.
the button (1 time);
4
Precisely ad-
justing the
"H" posi-
tion
Press the buttons until you reach the desired position.
6
Press and release the
count 4 movements.
two keys together;
2
= 5 sec
Hold down the but-
release it after 5
ton and
seconds;
4
Finely adjust-
ing the posi-
tion of limit
switch "1"
Press the buttons until you reach the desired position.
2
PRG
count 2 movements.
5
= 5 sec
" H "
Hold down the but-
ton and
end
4
On ANOTHER transmitter,
which has NOT been memo-
rised: hold down any button
you wish;
2
count 2 movements.
5
" 1 "
Hold down the
button and
3
= 5 sec
Hold down both buttons...
release them after 5 sec-
onds;
release it after 5 sec-
count 3 movements.
onds;
6
= 5 sec
...
release it after
5 seconds;
3
continues
Command
an DOWN
movement
Hold down the button and wait...
= 5 sec
release it after 5
count 3 movements.
seconds;
count 2 movements.
6
...
Select one of the following potions
and execute it:
• option A – to memorise the
3
FIRST "H" position.
• option B – to memorise a SUP-
PLEMENTARY "H" position.
end
...
4
count 4 movements.
end
3
4
2
English – 8
Need help?
Do you have a question about the E EDGE SI 228 LI ION and is the answer not in the manual?