Introduction - TASKING iSYSTEM NXP S32K148 Hardware User Manual

Introduction

NXP S32K148 Emulation Adapter is based on the 176-pin S32K148 superset device and
provides full trace capability for the:
·
48-pin
·
64-pin
·
100-pin
·
144-pin
device, where trace port is not available or lacks the full trace capability.
The Emulation Adapter might differ in some peripherals from the target device; there-
fore, the device datasheet should be checked.
Emulation Adapter supports the following debug and trace interfaces:
·
JTAG and SWD debug interface;
·
ETM/ITM trace to trace Cortex-M4 program execution; Trace data is connected to the external
trace port which then connects to 20-pin 1.27 mm CoreSight Debug Adapter;
·
Serial wire viewer (SWV) and printf() style debugging through a Single Wire Output (SWO)
"trace" pin on Cortex-M4.
The Emulation Adapter can also be used as a
purposes or for development and testing of an embedded application ahead of target board
availability.
More information about our products on
standalone device for microcontroller evaluation
www.isystem.com or via sales@isystem.com.