Safety Requirements - quadient iX-3 Series User Manual

1.1

Safety Requirements

Power Connection
Before connection, check whether the Mailing System is suitable for the local AC power
voltage; refer to the type plates at the back of each system component.
• Use an outlet located near the system that is easily accessible. Do not route the
power cord between pieces of furniture or over sharp edges.
• Avoid using outlets controlled by wall switches or shared by other equipment.
• Make sure there is no strain on the power supply cord.
Compliance
Energy Star® Compliance
Your mailing system is Energy Star® compliant, meaning that it will help to save energy
and money while protecting the environment.
THIS SYSTEM MUST BE GROUNDED
• Only connect the power plug to an outlet provided with a
protective ground contact.
• To reduce the risk of fire, use only the power cord supplied
with the Mailing System.
• Do not use ground adaptors.
• Do not use this product on a wet floor or near water.
• In case of liquid spillage, disconnect the power cord from
the outlet and proceed with cleaning.
1
3