Risk Of Injury During Transporting; Glass Breakage; Trip Hazard From Connection Cable - Sartorius Cubis MCE Series Operating Instructions Manual

Safety Instructions
12 Operating Instructions Cubis
2.8

Risk of Injury During Transporting

If the device is not transported correctly: The device could fall and cause an
injury, e.g. a foot injury. If the device is not placed down correctly, e.g., on a
laboratory table: Fingers might be crushed.
Disconnect the device from all connections at the installation site.
t
Use both hands when transporting the device and setting it down. To do
t
this, reach sideways under the device with both hands in the rear part of
the device.
Do not carry the device on the draft shield or the control unit.
t
2.9

Glass Breakage

Glass components can break if they fall or are handled incorrectly. Glass
fragments can cause cuts.
Do not use sharp or hard objects on the operating display.
t
Do not allow items to fall onto the operating display.
t
In the event of damage to the operating display or draft shield, do not
t
use the device. Contact Sartorius Service.

2.10 Trip Hazard From Connection Cable!

If the device's connection cables, e.g. the power supply cable, are laid
haphazardly: People may trip over the connection cables and injure
themselves.
Lay all connection cables in such a way, that trip hazards are avoided.
t
| MCE Models
®