Auto Delete - GE Definium 5000 Operator's Manual

Figure 10-15 Auto Send
Table 10-8 Auto Send Functions
Function
Auto Send
[ON] [OFF]
Network Host column
Auto Send column
[SAVE]
[CANCEL]

Auto Delete

Auto Delete automatically deletes images when the image database does not have enough space. Auto
Delete is enabled from the Utilities – Preferences screen.
Follow this process to configure Auto Delete.
1. From the Worklist screen, press [UTILITIES].
2. Select Preferences > Image Management.
3. Click Auto Delete [EDIT].
The Auto Delete screen appears.
4. Complete the information as described in Table 10-9.
Definium 5000 X-Ray System
Operator Manual
Turns Auto Send on or off.
Selecting On allows you to configure the default Auto Send settings.
Lists the available network locations where images may be transferred.
Refer to Network Connections
configure the available Network Hosts.
Allows you to choose which images are sent to each network host. You may
choose either Raw or Processed, both, or none. Leaving both choices
unselected means that no images will be sent to the network host.
Saves your selections as the default settings and closes the Auto Send
screen.
Closes the screen without saving your changes.
5197809-1EN
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
Description
(p. 10-2) for information about how to
Rev. 4 (13 February 2008)
10-23