GE Definium 5000 Operator's Manual page 69

Function
[PATIENT INFORMATION]
[ADD PATIENT]
[DELETE] or [DELETE ALL]
[START EXAM] or [RESUME
EXAM]
[EMERGENCY EXAM]
Definium 5000 X-Ray System
Operator Manual
Shows the Patient Information screen for the selected procedure.
NOTE: Patient Information is editable if the currently selected
procedure has not been opened. Once the exam starts the
Patient Information is no longer editable. Patient
Information is not editable if multiple procedures are
selected.
Refer to Add / Edit Patient Information
information.
Allows you to enter patient information and adds the patient to
the Patient List.
Refer to Add / Edit Patient Information
information.
Switches between [DELETE] and [DELETE ALL] to remove
procedures from the Worklist.
[DELETE] - Removes the selected procedure or procedures from
the Patient List.
[DELETE ALL] - Removes all completed and discontinued
procedures from the Patient List.
NOTE: [DELETE] or [DELETE ALL] does not remove procedures from
the RIS or HIS or remove any exam images from the image
database.
Refer to Delete Procedures
Starts, continues, or appends the selected procedure.
The button name changes depending on the Scheduled Status of
the selected procedure. If the selected procedure has a Status of
"Suspended", the button name changes to
[RESUME EXAM].
Begins an exam without selecting a procedure from the Patient
List or adding the patient. The system will assign a unique
tracking number as the Patient Name.
Refer to Chapter 6: Image Acquisition-Conduct an Emergency
Exam (p. 6-16) for more information.
The tracking number is the date and time the exam was initiated.
The time is recorded to the second.
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 5: Worklist
Description
(p. 5-15) for more
(p. 5-15) for more
(p. 5-12) for more information.
5-4