Table of Contents
Advertisement
View Patient Information
When accessed from the Image Management screen, the Patient Information screen displays exam
information about the acquired images in the lower left corner (Figure 9-2). All other patient information
is as described in
Chapter 5: Worklist-Add / Edit Patient Information
Figure 9-2 Patient Information from Image Management screen
Load Images from a CD
Follow this process to access images stored on a CD.
1. Insert the CD with images into the CD drive.
2. Press Source [CD1].
The exam list updates to show the images stored on the CD.
3. Select the exams.
4. Copy the exams to the Local database. Refer to
information.
5. Click the [LOCAL] Destination button.
A message appears: "Selected images will be copied to (destination name). Select OK to confirm."
6. Click [OK].
7. Open the exams from the Local database.
NOTE: If the exams are being viewed on a computer that has the DICOM viewer installed, images may be
viewed directly from the CD.
Definium 5000 X-Ray System
Operator Manual
Copy Exams and Images
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 9: Image Management
(p. 5-15).
(p. 9-8) for more
9-6
Advertisement
Table of Contents
