Change Image Display - GE Definium 5000 Operator's Manual

Change Image Display

The Format/Zoom panel (Figure 8-4) controls how many images appear in the Image Viewer screen at
one time and adjusts the magnification of each image.
The Zoom buttons change the size of the selected image shown in the Viewer. Table 8-2 describes the
Zoom options.
The Display Format buttons allow you to view up to 9 images at one time.
Figure 8-4 Format / Zoom panel
Table 8-2 Zoom tool descriptions
Tool
Zoom One
Zoom Half
Fit To
Screen
True Size
Definium 5000 X-Ray System
Operator Manual
Shows default the image size where one pixel on the detector equals one
pixel on the screen.
Reduces the image to 50% (four pixels on the detector equals one pixel
on screen).
Scales the image to fit within the Image Viewer screen.
Shows the image in the exact size it was acquired from the detector (one
centimeter on the detector equals one centimeter on screen).
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 8: Image Viewer
Description
8-6