Zenith Mode Code Information - Zenith Z-29 User Manual

Page
B.1
APPENDIX 8
Zenith Mode Code Information
The Z-29 Terminal recognizes the following ASCII characters
while it is operating in the Zenith mode.
OCT DEC HEX Chr
FUNCTIONAL DESCRIPTION OR CHARACTER
007 7 7 BEL Sounds a tone.
010 8
8
BS
Backspace. Moves the cursor one posi-
tion to the left. If it is at the left end of
the screen, nothing happens.
011 9
9
HT
Tab. Moves the cursor to the next tab
stop.
012 10
A LF Line Feed. Advances the cursor to the
next line. At the bottom of the screen,
it scrolls text up one line.
015 13 D
CR Carriage Return. Moves the cursor to the
first character position in the current line.
Nothing happens if the cursor is already
at the first character position.
016 14 E
so
Shift Out. Selects the G1 character set
as designated by SCS control sequence.
017 15 F SI
Shift In. Selects the GO character set as
designated by SCS control sequence.
030 24 18 CAN Cancel. Cancels the current escape se-
quence.
033 27 1B ESC Escape.
SUMMARY OF ZENITH ESCAPE SEQUENCES
In the following listings of escape sequences, we have elected
for the purpose of clarity to include a space between the es-
cape key (ESC) and the actual code. Under no circumstances
should you include this space. The term "defined scrolling
region" appears several times in these listings and means
lines 1-24 of the screen unless you have specifically altered
this region through the use of escape sequences and codes.