Table of Contents
Advertisement
Page
4.4
OPERATION
Tab Menu
To enter the Tab Mode, press the
ii
key if you are in the Setup
menu. If you are not in the Setup menu, press the
Egljlll~
key
and then the
ii
key. The bottom line will display:
#2341678901'34567890121456789012345678901234567890123456789012345678901234567890
In this
example,
the vertical lines represent tab locations at the
5th,
12th, 23rd,
and 71 st character positions. You can set and
reset tabs by moving the graphics block left or right with the ap-
propriate arrow
keys.
CURSOR MOVEMENT
To move the cursor
right,
press the right
arrow(~)
key. Once
the cursor reaches the right side of the display, it will not move
any further.
To move the cursor
left,
press the left arrow
(~)
key. Once
the cursor reaches the left side of the
display,
it will not move
any further.
SET TAB
To set a
tab,
position the cursor to the desired location and
press the up arrow (
t )
key.
CLEAR TAB
To reset (clear) a
tab,
position the cursor to the desired location
and press the down arrow (
i )
key.
Advertisement
Table of Contents
