Table of Contents
Advertisement
Page
4.7
OPERATION
The following table outlines the interface protocols you can
choose in the Setup Mode for the primary (DTE) and auxiliary
(DCE) ports in the Z-29. The ports may not be independently
configured. If you select either option, both ports will be simul-
taneously configured as shown.
SETUP MENU
OPTION
Hardware
Software
PRIMARY PORT (DTE)
AUXILIARY PORT (DCE)
Responds
to
(Obeys)
Responds to (Obeys) hard-
hardware handshake.
ware handshake.
Asserts (uses) hardware
Asserts nothing (Passive).
handshake.
Responds to nothing.
Responds to (Obeys) hard-
ware handshake.
Asserts (uses) software
handshake.
Asserts
(uses)
software
handshake.
SetupMenuC
To enter Menu C, press the
t!J
key if you are in the Setup Mode.
If you are not in the Setup Mode, press the
!$Hl411ij
key and
then thet!J key. The bottom line will display:
*MENU C*
1.
PORT normal
2. MODE
zem
th 3 HOLD SCRN off
4.
MONITOR off
Advertisement
Table of Contents
