Table of Contents
Advertisement
Page
4.3
OPERATION
Entering the Setup Mode
To enter the Setup Mode, press the
&UIWlli
key. The bottom
line will show setup menu A's display.
Menu Selection
To select any of the eight different Setup menu presentations,
Setup A through Setup G, and Setup
T,
press the correspond-
ing alphabetic key. You can access any of these menus from
any other setup presentation by simply pressing the alphabetic
key associated with that particular
menu.
Each function in the
menu is accessed by its associated numeral. Once you have
established your particular setup configuration
,
you may store
this menu in nonvolatile memory; just exit the Setup Mode
by pressing and holding the
!#ijllji
key and then pressing
the
!#1j411i
key.
Setup Menu A
To enter Setup Menu
A,
press the
~
key if you are in the
Setup
Mode.
If you are not in the Setup
Mode,
press the
@tj411i
key.
The bottom line will
display:
**SETUP MENU A** (Ver.1.00) 1. off line MENUS-A-to-G-or-T-for
TABS
ON/OFF LINE
Whenever you are "on
line,"
the Terminal is an input/output de-
vice for a host machine. If you are "off
line,"
the Terminal can
not transmit to or receive information from the host
computer,
but is controlled through its own keyboard
.
When the mode selected is off line, and the Status Line is ena-
bled,
the OFF LINE will be displayed on the bottom line.
You can change the state of the on/off line status by pressing
the
ii
key on the main keyboard.
Advertisement
Table of Contents
