Fill Screen; Video Attributes - Zenith Z-29 User Manual

Page
4.15
OPERATION
FILL SCREEN
The fill screen function allows you to fill the entire screen with
any one character. This function is used principally for service
of the video monitor and character generator within the Z-29
Terminal.
After you press the
~
key on the main keyboard , you can
fill the entire screen with any character you select by pressing
the appropriate key. You may change the displayed character
as many times as you desire. To return to Setup Menu G,
press the
l;l:tlll;W
key.
Video Attributes
There are sixteen different attributes available on a full screen
or character-by-character basis through software. For pro-
gramming information, see Appendixes A, B, and C.
You may step through the attributes of the entire screen by
pressing the BJ key on the main keyboard. The sixteen attributes
are:
1. Normal display at normal intensity.
2. Reverse video at normal intensity.
3. Normal video underlined at normal intensity.
4. Reverse video underlined at normal intensity.
5. Same as number 1 but blinking.
6. Same as number 2 but blinking.
7. Sameasnumber3butblinking.
8. Same as number 4 but blinking .
9. Same as number 1 but half intensity.
10. Same as number 2 but half intensity.
11. Same as number 3 but half intensity.
12. Same as number 4 but half intensity.
13. Same as number 5 but half intensity.
14. Same as number 6 but half intensity.
15. Same as number 7 but half intensity.
16. Same as number 8 but half intensity.