Lear Siegler Adm3A Mode Code Information - Zenith Z-29 User Manual

Page
0.1
APPENDIX D
Lear Siegler ADM3A Mode Code Information
The Z-29 Terminal recognizes the following ASCII Characters
while it is operating in the ADM3A mode.
OCT DEC HEX Chr
FUNCTIONAL DESCRIPTION OR CHARACTER
007 7
7 BEL Sounds a tone .
010 8 8 BS
Backspace. Moves the cursor one posi-
tion to the left. If it is at the left end of the
screen, nothing happens.
011 9 9
HT
Tab . Moves the cursor to the next tab
stop.
012 10
A LF
Line Feed. Advances the cursor to the
next line. At the bottom of the screen, it
scrolls text up one line.
013 11 B
VT
Moves the cursor up one position . If the
cursor is already at the top of the screen,
nothing else will happen.
014 12
c
FF
Moves the cursor one position to the right.
If the cursor is already at the right side of
the screen, nothing else will happen.
015 13 D CR
Carriage Return. Moves the cursor to the
first character position in the current line.
Nothing happens if the cursor is already at
the first character position .
016 14
E
so
Enables keyboard entry after it has been
disabled by code OFH.
017 15 F SI
Disables the keyboard entry. Use code
OEH to enable.
032 26
1A SUB Clears the screen and moves the cursor
to the home position (first position on the
top line).
036 30
1E RS
Moves the cursor to the home position.