Table of Contents
Advertisement
Page
4.11
OPERATION
WRAP ON/OFF
When the wraparound feature is enabled and you enter the
81 st character of any line, it is automatically printed at the
first character position of the next line. If the line is the last
line of the designated scrolling region, the screen will be
"scrolled" up one line and a new bottom line started with your
character in the first
position.
If this feature is disabled, any
characters you type after the 80th character will replace the
80th character on that line.
You can enable or disable the wraparound feature by pressing
the
iJ
key on the main
keyboard.
SCREEN SAVER
The screen will be automatically blanked out if no key is
pressed or the Terminal receives no data from the computer for
15
minutes.
This feature will help increase the life of the CRT.
CAPS LOCK
You can restore the screen by pressing the
key.
You can enable or disable the screen saver feature by pressing
the~
key on the main keyboard.
Setup Menu E
To enter Setup menu
E,
press the
[3
key if you are in the Setup
Mode.
If you are not in the Setup Mode, press the
MSIMIJ~
key
and then the
13
key.
The bottom line will
display:
*MENU E*
1.
KEYPAD SHFT off
2.
KEYPAD ALT off
3.
REPEAT on
4.
CLICK on
Advertisement
Table of Contents
