Important Safety Information; Read This First; Product Labels; Safety And Advisory Symbols - enphase IQ7+ Installation And Operation Manual

Important safety information

Read this first

This manual contains important instructions for use during the installation and maintenance of the IQ7 Series
Microinverters.
IMPORTANT: Enphase IQ Series Microinverters require the IQ Cable and are not compatible with previous
Enphase cabling. An IQ Gateway Metered is required to monitor the performance of the IQ Microinverters. The
IQ accessories work only with Enphase IQ Series Microinverters.

Product labels

The following symbols appear on the product label and are described here:
WARNING: Hot surface
DANGER: Refer to safety instructions
DANGER: Risk of electrical shock
Refer to the manual
Double insulated

Safety and advisory symbols

To reduce the risk of electric shock and to ensure the safe installation and operation of the Enphase IQ System,
the following safety symbols appear throughout this document to indicate dangerous conditions and
important safety instructions.
DANGER
:
WARNING
:
WARNING
:
NOTE
:

IQ7 Series Microinverter safety instruction

General safety
DANGER: Risk of
electric shock. Risk
of fire.
5
This indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
This indicates a situation where failure to follow instructions may be a safety hazard or
cause equipment malfunction. Use extreme caution and follow instructions carefully.
This indicates a situation where failure to follow instructions may result in a burn
injury.
This indicates information that is very important for optimal system operation. Follow
the instructions closely.
Only use electrical system components approved for wet locations.
Only qualified personnel should install, troubleshoot, or replace Enphase
microinverters or Enphase IQ Cable and accessories.
Ensure that all AC and DC wiring is correct and that none of the AC or DC wires
are pinched, shorted, or damaged. Ensure that all AC junction boxes are properly
closed.
© 2023 Enphase Energy Inc. All rights reserved.
IQ7+ and IQ7A Installation and Operation Manual – India
August 2023
USM-00002-1.0