8. Monitoring operation status
8. 1 Status monitor mode
Status of the inverter can be monitored.
To monitor the inverter when it is normally running,
Press the
Setup procedure to monitor the inverter status. (EX. Operation at 60 Hz)
Com.No. Details of indication Key operated LED display
Standard monitor
―
*1
mode
Parameter setup
FE01
mode
Status monitor
FE01
mode (rotating
direction)
Frequency
―
*2
command
Load indication
―
*3
DC voltage
*4
―
*5
Output voltage
―
Input terminal
information #1
FE06
FE50
Input terminal
FE51
information #2
Input terminal
information #3
Output terminal
information #1
FE07
Output terminal
FE52
information #2
FE53
Output terminal
information #3
Sink/source
FE48
switching status
Type of connected
FE47
option
FE54 last set data
FE55 last set data
FE08 CPU version
Flush memory
FE43
version
Control EEPROM
FE09
version
Drive EEPROM
FE44
version
(Continued on the following page)
key twice and the current status is indicated on the LED display.
MON
MON
MON
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
Running frequency indication (in operation)
(In the case monitor display mode setting
is set at [running frequency])
Indication of "Automatic acceleration
/deceleration()" that is the first basic
parameter
Indication of rotating direction
(: forward, : reverse)
Indication of frequency command value.
(In case of =)
Indication of inverter output current (load
current)(In case of =)
Indication of inverter DC voltage (Default
setting unit: [%]) (In case of =)
Indication of inverter output voltage (Default
setting unit: [%]) (In case of =)
Indication of ON/OFF status of control input
terminals (F, R, RES, ST, S1, S2, S3, S4) in
bits
Indication of ON/OFF status of optional control
input terminals (B8,B9,B10,B11) in bits
Indication of ON/OFF status of optional control
input terminals (B11,B12,B13,B14) in bits
Indication of ON/OFF status of control output
terminals (OUT1,OUT2,FL) in bits
Indication of ON/OFF status of optional control
output terminals (R1,R2,OUT3,OUT4) in bits
Indication of ON/OFF status of optional control
output terminals (ALM0,ALM1,ALM2,ALM3) in
bits
Indication of sink or source status
(: source, : sink)
Indication of connected options
Indication of value set last
Indication of value set last
Indication of version of the CPU
Indication of version of the flush memory
Indication of version of the control EEPROM
Indication of version of the drive EEPROM
H-1
Description