Toshiba TOSVERT VF-P7 Instruction Manual page 97

[: terminal board has priority (Enabled)]
Priority is given to commands entered from the terminal board even in control panel operation
mode.
Command from the control panel
(=)
Command from the terminal board
■Priority command from terminal board (Operation command)
Jog run
Injection braking
Forced jog run(forward) ：input terminal function 50/51 (*1)
Forced jog run(reverse) ：input terminal function 52/53 (*1)
(*1)These settings are invalid when the control panel stop pattern parameter  is set at .
An example of switching to jog run in control panel operation mode
[Incase that terminals S4 and CC are assigned to jog run]
Assign the control terminal S4 (default: 16 (preset-speed #4)) to jog run.
Title
Input terminal selection #8 (S4)

Output frequency[Hz]
Reference
０
Panel key
ＲＵＮ
ST-CC
S4-CC
(Jog run)
A
：input terminal function 18/19
：input terminal function 22/23 (*1)
Function
Forward
Forward
ＳＴＯＰ ＲＵＮ
F-5
Internal command
B
A: No command from the terminal board.
A: Command from the terminal board.
Adjustment range
∼
ＳＴＯＰ ＲＵＮ
Setting value
(Jog run)
ＳＴＯＰ