Table of Contents
Advertisement
Accessories
6.11 SKYCUTTER®
SkyCutter is capable of cutting up to a thickness of 3/8" metal. It can produce 27 A at 92
VDC at 35% duty cycle or 14 A at 92 VDC at 60% duty cycle. It receives power from the
SkyPower system.
6.11.1
Safety Precautions
Do not overload platform.
De-rate the platform by 70 lb (32 kg) when accessory is in the platform.
•
Check for cracked welds and damage to plasma supports.
•
Check for secure installation of cutter and bracket.
•
Ensure no personnel are beneath platform.
•
Do not exit platform over rails or stand on rails.
•
Use this option only on approved models.
•
Keep lanyard attached at all times.
•
Use correct cutting settings.
•
Do not use electrical cords without ground.
112
Figure 32. SkyCutter System
WARNING
WARNING
31222411
BM000006A
800AJ HC3
Advertisement
Table of Contents
